Crane na Gadar Sama Mai Tsada Mai Tsada 10ton Mai Hana Fashewa

Takaitaccen Bayani:

Mu masana'anta ne da ke ƙwarewa a kan crane na gada mai ɗaure ɗaya. Crane na gada namu zai iya biyan buƙatunku daban-daban. Tuntuɓe mu don ƙarin bayani.

Ƙarfin ɗagawa:Tan 5-50

Tsawon tazara:7.5-31.5m

Daraja ta aiki:A3-A5

Aika mana imel

Cikakken Bayani game da Samfurin

Alamun Samfura

Crane na sama na nau'in LXAna amfani da shi sosai a cikin rumbunan ajiya na tsire-tsire, kayan aiki don ɗaga kaya. LDA Sinlge Girder Overhead Crane yana da hanyoyi guda biyu na aiki, ɗakin ƙasa ko ɗakin aiki wanda ke da samfurin buɗewa da samfurin rufewa kuma ana iya sanya shi a gefen hagu ko dama bisa ga yanayin aiki. Kuma alkiblar shiga ƙofar tana da siffofi biyu, gefe da ƙarshe don biyan buƙatun masu amfani daban-daban na yanayi daban-daban.

https://www.hyportalcrane.com/contact-us/

Abu	Crane na Dakatarwa na Lantarki Na LX Nau'in Lantarki Guda Ɗaya
Ƙarfin ɗagawa (tan)	1-10
Tsayin ɗagawa (m)	6/9/12/18
Tsawon (m)	3-16m
Gudun ɗagawa (m/min)	8 8/0.8
Gudun tafiyamm (m/min)	20/30
Matsayin aiki	A3-A5
Yanayin aiki yanayin zafi	-25~40
Tushen wutar lantarki	matakai uku 380V 50HZ

Crane na lantarki mai amfani da wutar lantarki na LDP ƙaramin crane ne mai ƙaramin girman headroom. Ɗagawa na lantarki yana zaune a gefe ɗaya na babban girder, wanda ke ƙara sararin ɗaga ƙugiya kuma yana rage tsayi da farashi na bitar. Ya dace da wuraren da headroom na bitar yake ƙasa.

Ƙarfin aiki	Tan 3 ~ 10
Aikin Aiki	A3~A4
Tsayin Ɗagawa	6 m 9 m 12 m
Tsawon lokaci	7.5~22.5m
Gudun Tafiya	20 m/min 30 m/min
Gudun Ɗagawa	8 (0.8/8) m/min 7(0.7/7)
Hanyar Sarrafawa	Sarrafa Layin Pendent+Sarrafa Nesa ta Rediyo
Matsakaicin Load na Taya	20.1 kn~73.2 kn
Ƙaramin Load na Taya	5.39 kn~ 20.49 kn

Kera mai ɗaukar nauyi ɗaya muhimmin kayan aiki ne don injina da sarrafa kansa na tsarin samarwa a cikin masana'antu na zamani da ɗagawa da jigilar kaya. Saboda haka, ana amfani da kera mai ɗaukar nauyi ɗaya a cikin masana'antu na ciki da waje, masana'antar sinadarai ta ƙarfe da ƙarfe, sufuri na jirgin ƙasa, tashoshin tashar jiragen ruwa da jigilar kayayyaki da sauran sassa da wurare. Ita ce mafi yawan amfani da injina kuma mafi yawan adadin ɗagawa.

Ƙarfin Ɗagawa	tan	1	2	3	5	10	16	20	25
Tsawon lokaci	S(m)	7.5~31.5							7.5~25.5
Tsayin ɗagawa	m	6-30				9-30
Gudun ɗagawa	m/min	8 (0.8/8)				7 (0.7/7)	3.5 (0.35/3.5)	3.3 (0.33/3.3)	3 (0.3/3)
Gudun tafiya na keken hawa	m/min	20(30)					18	14	16
Gudun tafiya na crane	m/min	20(30)
Ajin aiki		A3~A4
Nau'in waƙa		P18	P18 P24	P24	P24	P24 P30	P30 P38	P38 P43

HYCrane VS Wasu

Kayanmu

1. Tsarin siyan kayan masarufi yana da tsauri kuma masu duba inganci sun duba shi.
2. Kayan da aka yi amfani da su duk kayayyakin ƙarfe ne daga manyan masana'antun ƙarfe, kuma an tabbatar da ingancinsu.
3. A yi amfani da tsari mai tsauri wajen sanya lambobi a cikin kaya.

1. An yanke kusurwoyi, an fara amfani da farantin ƙarfe mai girman mm 8, amma an yi amfani da shi ga abokan ciniki mai girman mm 6.
2. Kamar yadda aka nuna a hoton, ana amfani da tsoffin kayan aiki don gyara.
3. Sayen ƙarfe mara tsari daga ƙananan masana'antun, ingancin samfura ba shi da tabbas.

Sauran Alamu

Kayanmu

1. Na'urar rage gudu da birki na injina tsari ne mai matakai uku-cikin-ɗaya
2. Ƙarancin hayaniya, aiki mai ɗorewa da ƙarancin kuɗin kulawa.
3. Sarkar hana faɗuwa da aka gina a ciki na iya hana ƙusoshin su sassauta, da kuma guje wa cutar da ke tattare da faɗuwar injin ba da gangan ba ga jikin ɗan adam.

1. Injinan zamani: Yana da hayaniya, yana da sauƙin sawa, yana da ɗan gajeren lokaci na aiki, kuma yana da tsadar kulawa sosai.
2. Farashin yana da ƙasa kuma ingancinsa ba shi da kyau sosai.

a
S

Sauran Alamu

Tayoyinmu

An yi wa dukkan ƙafafun magani da zafi kuma an daidaita su, kuma an shafa saman da man hana tsatsa don ƙara kyawun su.

1. Kada a yi amfani da tsarin gyaran wutar da ke feshewa, mai sauƙin tsatsa.
2. Rashin ƙarfin ɗaukar kaya da kuma ƙarancin tsawon lokacin aiki.
3. Farashi mai rahusa.

s
S

Sauran Alamu

Mai Kula da Mu

1. Injinan inverters ɗinmu suna sa crane ya yi aiki da ƙarfi da aminci kawai, amma kuma aikin ƙararrawa na inverter yana sa kula da crane ya zama mai sauƙi da wayo.
2. Aikin daidaita kansa na inverter yana bawa injin damar daidaita ƙarfinsa gwargwadon nauyin abin da aka ɗaga a kowane lokaci, ta haka ne zai adana farashin masana'anta.

Hanyar sarrafawa ta na'urar sadarwa ta yau da kullun tana ba da damar crane ya kai matsakaicin ƙarfin bayan an fara shi, wanda ba wai kawai yana sa tsarin crane ɗin ya girgiza zuwa wani mataki a lokacin da aka fara ba, har ma a hankali yana rasa tsawon rayuwar injin.

Sauran Alamu

Sufuri

LOKACIN RUFEWA DA ISARWA

Muna da cikakken tsarin tsaro na samarwa da kuma ma'aikata masu ƙwarewa don tabbatar da isar da kayayyaki cikin lokaci ko da wuri.

BINCIKE DA CI GABA

Ƙarfin ƙwararru.

ALAMA

Ƙarfin masana'antar.

PRODUCTION

Shekaru na gwaninta.

MANHAJAR

Tabo ya isa.

Asiya

Kwanaki 10-15

Gabas ta Tsakiya

Kwanaki 15-25

Afirka

Kwanaki 30-40

Turai

Kwanaki 30-40

Amurka

Kwanaki 30-35

Ta hanyar tashar jiragen ƙasa tana fitar da akwatin katako na yau da kullun, pallet na katako a cikin Kwantena mai tsawon ƙafa 20 da ƙafa 40. Ko kuma kamar yadda kuke buƙata.