Na'urar Lantarki Mai Lantarki Mai Nauyin Tan 5 zuwa Tan 50 Farashin Crane Mai Kaya Hoto

Farashin Kekunan Sama na Tan 5 zuwa Tan 50

Takaitaccen Bayani:

Mu masana'anta ne da ke ƙwarewa a kan crane na gada mai ɗaure ɗaya. Crane na gada namu zai iya biyan buƙatunku daban-daban. Tuntuɓe mu don ƙarin bayani.

Ƙarfin ɗagawa:Tan 5-50

Tsawon tazara:7.5-31.5m

Daraja ta aiki:A3-A5

Aika mana imel

Cikakken Bayani game da Samfurin

Alamun Samfura

Ana kuma kiran crane mai ɗaurewa guda ɗaya na LX, wanda ake kira da crane mai ɗaurewa guda ɗaya, wanda ke ƙarƙashin ratayewa, ana amfani da shi tare da injin ɗagawa na lantarki na monorail CD ko MD, yana da matsewa mai ƙarfi, ƙaramin ɗakin girki, nauyi mai sauƙi da nauyin ƙafafun mai sauƙi. Crane ne mai tafiya a kan hanya mai sauƙi tare da hanyar I beam. Matsakaicin ƙarfinsa shine 0.5T, 1T, 2T, 3T, 5T; tsawonsa daga mita 3 zuwa mita 16. Yana amfani da ikon sarrafa ƙasa kuma yana aiki a yanayin zafi na -20-40 Celsius. An haramta amfani da kayan aikin a yanayin da ke ƙonewa, fashewa ko lalata.

https://www.hyportalcrane.com/contact-us/

S1	Nau'i	Nau'in LX Nau'in Gilashi Guda Ɗaya
1	Iyakar lif	0.5-32ton
2	Tsawon lokaci	6-42 m (an keɓance shi)
3	Tsawon ɗagawa	An keɓance
4	Gudun ɗagawa	8 m / min (an keɓance shi)
5	Gudun ketare iyaka	20 m/min (an keɓance shi)
6	Gudun tafiya mai tsawo na crane	20 m/min (an keɓance shi)
7	Aikin yi	A4-A5
8	Yanayin sarrafawa	Sarrafa nesa mara waya & Sarrafa Pendent
9	Zafin aiki	digiri -25-40
10	Tushen wutan lantarki	380 v/50 hz/3p (an keɓance shi)

An tsara kuma an inganta keken LDP mai ɗaukar nauyi guda ɗaya bisa ga samfurin LD, idan aka kwatanta da samfurin LD; an sanye shi da fasalulluka na tsari mai ma'ana, ƙarfi mai ƙarfi, da nauyi mai sauƙi na cikakken saiti, wanda zai iya adana sararin masana'antar ku da farashin saka hannun jari, tsarin tafiya na musamman shine mafi kyawun zaɓinku. Tsarin aiki na sama ya fi kyau a lokuta inda mai amfani na ƙarshe ke da matsala da ɗakin kai. Tsarin aiki mafi inganci shine tsarin crane mai ɗaukar nauyi biyu, mai ɗaukar nauyi.

Ƙarfin ɗagawa				tan	3	5	10
Matsayin aiki					A3-A4
Tsawon lokaci				m	7.5-22.5m
Yanayin aiki zafin jiki				°C	-25~40
Tafiya tsarin aiki	saurin aiki			m/min	20/30
	Uwa	iko		kw	20.8/21.5
		saurin juyawa		m/min	1500
Ɗagawa tsarin aiki	saurin ɗagawa		ɗaga CD	m/min	8
			MD ɗagawa	m/min	(8/0.8)
	tsayin ɗagawa			H(m)	6 9 12
	gudun tafiya			m/min	20/30

Injin ɗaukar kaya na lantarki na LDA mai amfani da hasken rana ɗaya, ƙaramin injin ɗagawa ne. Ƙarfin ɗagawansa shine tan 1-32. Tsawonsa shine mita 7.5 ~ 31.5, matakin aiki shine A3-A5, kuma yanayin zafi na yanayin aiki shine -25℃ ~ 40℃. Tsarin ɗagawa yana da injin ɗagawa na lantarki na CD1 mai sauri ɗaya da kuma injin ɗagawa na lantarki mai saurin gudu biyu.

Ƙarfin aiki			Tan 1 ~ 32
Aikin Aiki			A3~A5
Matsakaicin Tsawon Ɗagawa			mita 32
Matsakaicin tsawon lokaci			mita 35
Hanyar Sarrafawa			Sarrafa Layin Pendent+Sarrafa Nesa ta Rediyo
Gudun Ɗagawa			8/1.3 m/min
Gudun Tafiya			30m/min
Tushen wutan lantarki			380V 50Hz Mataki na 3 ko kuma an keɓance shi
Babban Sashen Wutar Lantarki			Schneider

HYCrane VS Wasu

Kayanmu

1. Tsarin siyan kayan masarufi yana da tsauri kuma masu duba inganci sun duba shi.
2. Kayan da aka yi amfani da su duk kayayyakin ƙarfe ne daga manyan masana'antun ƙarfe, kuma an tabbatar da ingancinsu.
3. A yi amfani da tsari mai tsauri wajen sanya lambobi a cikin kaya.

1. An yanke kusurwoyi, an fara amfani da farantin ƙarfe mai girman mm 8, amma an yi amfani da shi ga abokan ciniki mai girman mm 6.
2. Kamar yadda aka nuna a hoton, ana amfani da tsoffin kayan aiki don gyara.
3. Sayen ƙarfe mara tsari daga ƙananan masana'antun, ingancin samfura ba shi da tabbas.

Sauran Alamu

Kayanmu

1. Na'urar rage gudu da birki na injina tsari ne mai matakai uku-cikin-ɗaya
2. Ƙarancin hayaniya, aiki mai ɗorewa da ƙarancin kuɗin kulawa.
3. Sarkar hana faɗuwa da aka gina a ciki na iya hana ƙusoshin su sassauta, da kuma guje wa cutar da ke tattare da faɗuwar injin ba da gangan ba ga jikin ɗan adam.

1. Injinan zamani: Yana da hayaniya, yana da sauƙin sawa, yana da ɗan gajeren lokaci na aiki, kuma yana da tsadar kulawa sosai.
2. Farashin yana da ƙasa kuma ingancinsa ba shi da kyau sosai.

a
S

Sauran Alamu

Tayoyinmu

An yi wa dukkan ƙafafun magani da zafi kuma an daidaita su, kuma an shafa saman da man hana tsatsa don ƙara kyawun su.

1. Kada a yi amfani da tsarin gyaran wutar da ke feshewa, mai sauƙin tsatsa.
2. Rashin ƙarfin ɗaukar kaya da kuma ƙarancin tsawon lokacin aiki.
3. Farashi mai rahusa.

s
S

Sauran Alamu

Mai Kula da Mu

1. Injinan inverters ɗinmu suna sa crane ya yi aiki da ƙarfi da aminci kawai, amma kuma aikin ƙararrawa na inverter yana sa kula da crane ya zama mai sauƙi da wayo.
2. Aikin daidaita kansa na inverter yana bawa injin damar daidaita ƙarfinsa gwargwadon nauyin abin da aka ɗaga a kowane lokaci, ta haka ne zai adana farashin masana'anta.

Hanyar sarrafawa ta na'urar sadarwa ta yau da kullun tana ba da damar crane ya kai matsakaicin ƙarfin bayan an fara shi, wanda ba wai kawai yana sa tsarin crane ɗin ya girgiza zuwa wani mataki a lokacin da aka fara ba, har ma a hankali yana rasa tsawon rayuwar injin.

Sauran Alamu

Sufuri

LOKACIN RUFEWA DA ISARWA

Muna da cikakken tsarin tsaro na samarwa da kuma ma'aikata masu ƙwarewa don tabbatar da isar da kayayyaki cikin lokaci ko da wuri.

BINCIKE DA CI GABA

Ƙarfin ƙwararru.

ALAMA

Ƙarfin masana'antar.

PRODUCTION

Shekaru na gwaninta.

MANHAJAR

Tabo ya isa.

Asiya

Kwanaki 10-15

Gabas ta Tsakiya

Kwanaki 15-25

Afirka

Kwanaki 30-40

Turai

Kwanaki 30-40

Amurka

Kwanaki 30-35

Ta hanyar tashar jiragen ƙasa tana fitar da akwatin katako na yau da kullun, pallet na katako a cikin Kwantena mai tsawon ƙafa 20 da ƙafa 40. Ko kuma kamar yadda kuke buƙata.