Babban injin ɗaukar kaya na sama da gada mai nauyin tan 3.2 mai nauyin tan 32 wanda aka nuna Hoton da aka nuna

Crane mai girman tan 3.2 mai nauyin tan 32 na gada mai aiki sosai

Takaitaccen Bayani:

Tsara samfuran crane na gada masu dacewa bisa ga buƙatun abokin ciniki, yana bawa abokan ciniki damar samun fa'idodi mafi girma tare da mafi ƙarancin kuɗi

Ƙarfin ɗagawa:Tan 3.2-32

Tsawon tazara:10.5-25.5m

Daraja ta aiki:A3-A5

Aika mana imel

Cikakken Bayani game da Samfurin

Alamun Samfura

Crane mai ɗaukar nauyi guda ɗaya

Ƙarfin aiki: 1-30ton

Tsawon tsayi: 7.5-31.5m

Matsayin aiki: A3-A5

Zafin aiki: -25"C zuwa 40"C

https://www.hyportalcrane.com/contact-us/

Ƙaramin crane na sama na headroom

Ƙarfin aiki: 2-30ton

Tsawon: 7.5-31.5m

Matsayin aiki: A3-A5

Zafin aiki: -25"C zuwa 40"C

Crane mai saman dakatarwa

Ƙarfin aiki: 0.5-5ton

Tsawon tsayi: mita 3-16

Matsayin aiki: A3-A5

Zafin aiki: -25"C zuwa 40°C

Crane mai hana fashewa

Ƙarfin aiki: 1-10ton

Tsawon: 7.5-22.5m

Matsayin aiki: A3-A5

Zafin aiki: -25"C zuwa 40"C

HYCrane VS Wasu

Kayanmu

1. Tsarin siyan kayan masarufi yana da tsauri kuma masu duba inganci sun duba shi.
2. Kayan da aka yi amfani da su duk kayayyakin ƙarfe ne daga manyan masana'antun ƙarfe, kuma an tabbatar da ingancinsu.
3. A yi amfani da tsari mai tsauri wajen sanya lambobi a cikin kaya.

1. An yanke kusurwoyi, an fara amfani da farantin ƙarfe mai girman mm 8, amma an yi amfani da shi ga abokan ciniki mai girman mm 6.
2. Kamar yadda aka nuna a hoton, ana amfani da tsoffin kayan aiki don gyara.
3. Sayen ƙarfe mara tsari daga ƙananan masana'antun, ingancin samfura ba shi da tabbas.

Sauran Alamu

Kayanmu

1. Na'urar rage gudu da birki na injina tsari ne mai matakai uku-cikin-ɗaya
2. Ƙarancin hayaniya, aiki mai ɗorewa da ƙarancin kuɗin kulawa.
3. Sarkar hana faɗuwa da aka gina a ciki na iya hana ƙusoshin su sassauta, da kuma guje wa cutar da ke tattare da faɗuwar injin ba da gangan ba ga jikin ɗan adam.

1. Injinan zamani: Yana da hayaniya, yana da sauƙin sawa, yana da ɗan gajeren lokaci na aiki, kuma yana da tsadar kulawa sosai.
2. Farashin yana da ƙasa kuma ingancinsa ba shi da kyau sosai.

a
S

Sauran Alamu

Tayoyinmu

An yi wa dukkan ƙafafun magani da zafi kuma an daidaita su, kuma an shafa saman da man hana tsatsa don ƙara kyawun su.

1. Kada a yi amfani da tsarin gyaran wutar da ke feshewa, mai sauƙin tsatsa.
2. Rashin ƙarfin ɗaukar kaya da kuma ƙarancin tsawon lokacin aiki.
3. Farashi mai rahusa.

s
S

Sauran Alamu

Mai Kula da Mu

1. Injinan inverters ɗinmu suna sa crane ya yi aiki da ƙarfi da aminci kawai, amma kuma aikin ƙararrawa na inverter yana sa kula da crane ya zama mai sauƙi da wayo.
2. Aikin daidaita kansa na inverter yana bawa injin damar daidaita ƙarfinsa gwargwadon nauyin abin da aka ɗaga a kowane lokaci, ta haka ne zai adana farashin masana'anta.

Hanyar sarrafawa ta na'urar sadarwa ta yau da kullun tana ba da damar crane ya kai matsakaicin ƙarfin bayan an fara shi, wanda ba wai kawai yana sa tsarin crane ɗin ya girgiza zuwa wani mataki a lokacin da aka fara ba, har ma a hankali yana rasa tsawon rayuwar injin.

Sauran Alamu

Aikace-aikace & Sufuri

ANA AMFANI DA SHI A FINA-FINAI DA YAWAN

Gamsar da zaɓin masu amfani a ƙarƙashin yanayi daban-daban.
Amfani: ana amfani da shi a masana'antu, rumbun ajiya, kayan aiki don ɗaga kaya, don biyan buƙatun aikin ɗaga kaya na yau da kullun.

Bitar Samarwa

rumbun ajiya

Bita na Shago

Aikin Gyaran Roba

LOKACIN RUFEWA DA ISARWA

Muna da cikakken tsarin tsaro na samarwa da kuma ma'aikata masu ƙwarewa don tabbatar da isar da kayayyaki cikin lokaci ko da wuri.

BINCIKE DA CI GABA

Ƙarfin ƙwararru.

ALAMA

Ƙarfin masana'antar.

PRODUCTION

Shekaru na gwaninta.

MANHAJAR

Tabo ya isa.

Asiya

Kwanaki 10-15

Gabas ta Tsakiya

Kwanaki 15-25

Afirka

Kwanaki 30-40

Turai

Kwanaki 30-40

Amurka

Kwanaki 30-35

Ta hanyar tashar jiragen ƙasa tana fitar da akwatin katako na yau da kullun, pallet na katako a cikin Kwantena mai tsawon ƙafa 20 da ƙafa 40. Ko kuma kamar yadda kuke buƙata.